How much grass seed do I need to overseed?
To overseed 1,000 square feet, you need about 3.5 lb of grass seed — a typical tall-fescue rate — or about 7 lb if you are starting a brand-new lawn on the same area. Across common grass types the new-lawn amount ranges from 1.5 lb to 8 lb.
Grass seed for 1,000 sq ft, by grass type
| Grass type | New lawn (pounds) | Overseeding (pounds) |
|---|---|---|
| Tall Fescue | 7 lb | 3.5 lb |
| Kentucky Bluegrass | 2.5 lb | 1.5 lb |
| Perennial Ryegrass | 8 lb | 4 lb |
| Bermuda | 1.5 lb | 1 lb |
| Generic / mixed | 5 lb | 2.5 lb |
Rates are typical U.S. cooperative-extension ranges (mid-range), applied to 1,000 sq ft. Your seed bag's label is the authority — read it and adjust, and buy about 5–10% extra for edges and thin spots.
Frequently asked questions
How much grass seed do I need to overseed?
To overseed 1,000 square feet, plan on about 3.5 lb of grass seed (or about 7 lb to seed it new), using a typical tall-fescue rate. The exact amount depends on the grass type — across common cool- and warm-season grasses the new-lawn figure ranges from 1.5 lb to 8 lb. Enter your real dimensions in the calculator above to get a number for your specific lawn and seed.
Does the grass type change how much seed I need for 1,000 sq ft?
Yes — a lot. Fine, spreading grasses like Kentucky bluegrass need far less than bunch grasses. For 1,000 sq ft, a new lawn needs about 2.5 lb of Kentucky bluegrass but about 8 lb of perennial ryegrass. The table on this page lists every common grass type so you can match your seed bag.
How is the grass seed amount for 1,000 sq ft calculated?
Seed is applied at a rate in pounds per 1,000 square feet, so pounds = rate × (area ÷ 1,000). This page works from 1,000 square feet; enter your own dimensions above — in feet, yards or metres — and the calculator does the arithmetic, including the metric conversion, for you.
Are these seeding rates exact?
They are typical U.S. cooperative-extension ranges, chosen mid-range and rounded for a planning estimate. Your seed bag's label is the real authority: it gives the exact rate for that blend and whether it is a new-lawn or overseeding rate. Always read the bag and adjust, and buy about 5–10% extra for edges and thin spots.
Grass seed for other sizes
For 1,000 sq ftFor 1 acreFor 2 acresFor ½ acreFor 100 m²Per square footPer square metre New lawn vs overseeding Full calculator →